Southern Ky Mini Tractors
THIS IS PICTURES OF THE NEW CHAIN CATCHER THAT IS TO BE USED AT THE CHRISTIAN AND GRAYSON CO. PULLS
This has to be constructed out of at least 11ga - 1"x1" tubing or out of 1/4" plate steel - it needs to come behind the tires by 8" and have a 3"x3" skid plate mounted to the bottom at a maximum of 5" off the ground - the cross bar that connects the two sides has to be a minimum of 16" off the ground to the top - may be either bolted or welded to the tractor - anyone from an outside club will be able to pull at either club 1 time before being required to have the catcher installed - any questions please call Homer Aubrey @ 270-259-3097
If all you ever do is the best you can then you've done something to be proud of! - ( Montgomery Gentry )
Life & all it entails, generally is determined by how we look at it, Concentrate on what we can change & control instead of worrying about that which we can't, you may soon find out life isn't all that bad, remember there's always someone that's got it worse than you & they're still making do, it's all about attitude.
B.F.A. Pulling Tractors & Parts
Frames - Axels - Sprockets - Weights - Turn-key Rods - Motors
We are Dealers for Dick Cepek & Pit Bull tires , Douglas & Real Wheels, Azusa , Yoshimura, Dyna2000 Ignitions, Peer Chain, Sprocket Specialist, Sudco & many other
for info check our web site at
Tractor Pulling is 65% hoping you guessed the right gear, tire pressure, weight setting, dirt condition & path down track, 20% good luck & 15% having got a good answer about what went wrong
This site has been pulled
times since 4-1-00
Site built by Dave Melton and owned by ( suthrn@skhr.net )